Starting a business

 

 

- Fabrication
- Fabrication Workshop (metal plates)

- Machining
- Machining Workshop

Starting off/ Fabrication


People often ask us how much it would cost to start a fabrication workshop. To simplify the task, you will find below a list of equipments as well as amounts required to invest for the starting of your own shop.

As time passes, the market value of the described machines may change, we do not recommend creating your business plan based on these prices.


However, should you need the most recent information, it will be our pleasure to provide it to you.

>Back to top of page.



Fabrication Workshop (metal plates)

 

Equipment Value of Used Value of New
Hydraulic Guillontine Shear
Capacities:
-Cut: 10’ X ¼” Includes safety guards for back cuts		 In excellent condition
( used & mechanical) starting at: $20,000
(USD or CDN)		 Equipped with a space between blades for adjustment, an attack angle, and a motorized cutting guide starting at $37,000
Hydraulic Press Brake
Capacities:
-Bending length: 12’
-Tonnage: 15 tons
(10’ X ¼”)		 In excellent condition
( used & mechanical) starting at $25,000 **
(USD or CDN)		 Motorized bending back guide.
Multiple-openings
4-way die and punching kit starting at $67,500
Horizontal Bandsaw
Capacities:
-Rectangular: 7” X 12”
-Blade: ¾” 90 degree cut with possibility of pivotting vices to cut at an angle.

or		 In excellent condition
(used & mechanical)
Coolant system, control cylinder with descend, blade starting at $800Normally 220V/1/60		 Coolant system, cylinder control with descend , blade starting at $1,200.
Available:20V/1/60
Horizontal Bandsaw
Capacities:
-Rectangular: 10” X 16”
-Blade: 1” with pivotting vises for angle cuts.
or		 In excellent condition
(used & mechanical)
cylinder control for descend, blade starting at $2,000		 Equipped with collant system, cylinder control for descend, blade starting at $3,300 Available:20V/1/60
Horizontal Bandsaw
Capacities:
-Rectangular: 10” X 16”
-Blade: 1” with pivotting head for angle cuts.		 In excellent condition
(Used & mechanical)
Coolant system, cylinder control of decend, blade starting at $4,000		 Equipped with coolant system, cylinder control for descend, blade starting at $5,600 Add: $500 to $1,200 for 20V/1/60
Geared Head Bench Drill
Capacities:
-Percage/ Punching: 1 ¼”Type: Speed belt and storied pulleys

or		 In excellent condition
(Used & mechanical)
starting at $600 Available 220V/1/60		 Includes drill chuck starting at $950 Avaiable 20V/1/60
Geared Head Bench Drill
Capacities:
-Drilling/Piercing: 1 ¼” Type: gearbox type and automatic speeds.
or		 In excellent condition
(Used & mechanical)
Starting at $3,000 Add: $500 to $1,200
for 220V/1/60		 Includes drill chuck
Starting at $3,250
Add: $500 to $1,200
for 220V/1/60
Radical Drill
Capacities:
Drilling/Piercing : 1 ¼ ”
and moreArms Length: 30” and more.		 In excellent condition (Used& mechanical)
Starting at $6,000 Add: $1,000 to $1,800
for 220V/1/60		 Includes drill chuck starting at $10,500
Add: $1,000 to $1,800 for 20V/1/60

 

** For the used hydrualic press brakes, add a drilling multiple opening 4 way die.  Available in 10’ length starting at $3,000 (new).

 

 

P.S.

-We may not have all the items listed above in stock.
-The transportation is not includes in the prices shown.
-The new equipment is guarenteed for 1 year on parts (all or certain)….
-We do have a 30 day return policy on all used equipment, transportation costs are the buyer’s responsibility.
-The dimensions shown above correspond to demands we have received in the past.

 

Discounts are given upon purchase of several machines and tools.

 

> Back to Top of Page

Starting Off /  Machining Workshop

 

People often ask us how much it would cost to start a factory workshop. To simplify the task, you will find below a list of equipments as well as amounts required to invest for the starting of your own shop.

 

As time passes, the market value of the described machines may change, we do not recommend creating your business plan based on these prices.


However, should you need the most recent information, it will be our pleasure to provide it to you.

 

>Back to Top of Page

 


Machining Workshop

 

Equipment Value of Used Value of New
Conventional Geared head
Capacities:
-Over ways: 16” to 20”
-Between centers: 60” to 80”Threads imperial and metrics		 In excellent condition
(Used & mechanical)
And all equipped (without digital readout) starting at $8,000.Add: $500 to $1,500
for 220V/1/60

All equipped (without digital readout) staring at $14,000


Digital readout: $3,000 to $5,000
 
Turret Mill
Type : “Bridgeport”
Capacities:
-Table: 9” X 42”
-Spindle Taper: R8
-Motor: 3 HP

or		 In excellent condition
(Used & mechanical)
with longitudinal feeds
(without digital readout)
strating at $5,000		 Equipped with 2-axis digital readout, coolant system, and clamp kit, strating at $10,500

Avaible : 220V/1/60
Universal Mill
Capacities :
- Table : 10'' X 50''
- Spindle : #40
- Motor : 5 HP

In excellent condition
(Used & mechanical)
with automatic (automatic feeds) (without digital readout) starting at $5,000

Add: $500 to $1,200
for 220V/1/60

Equipped with 3-axis automatic feeds


Starting at $20,000

Add: $500 to $1,200 for 220V/1/60
Horizontal Bandsaw
Capacities:
-Rectangular: 7” X 12”
-Blade: ¾”Cut 90° degrees with possibility of pivotting vises for angle cuts

or

In excellent condition
(Used & mechanical) Coolant system, cylinder control for descend, blade starting at $800

Normally: 220V/1/60

Equipped with a coolant system, cylinder control or descend, blade starting at : $1,200.


Available 220V/1/60
Horizontal Bandsaw
Capacities:
-Rectangular: 10” X 16”
-Blade: 1”With pivotting vises for angle cuts.
or		 In excellent condition
(Used & mechanical)coolant system, cylinder control for descend, blade starting at $2,000

Equipped with a coolant system, cylinder control for descend, blade starting at $3,300

Available 220V/1/60
Horizontal Bandsaw
Capacities:
-Rectangular: 10” X 16”
-Blade: 1”With pivotting head for angle cuts.

In excellent condition
(Used & mechanical)
Cooalnt system, cylinder control for descend, starting at $4,000

Add: $500 to $1,200 for 220V/1/60

 Equipped with coolant system, cylinder control for descend, blade starting at $5,600

Add: $500 to $1200 for 220V/1/60
Geared head Bench Drill
Capacities:
-Drilling/Piercing: 1 ¼ “Type: speed belt and storied pulleys

or

In excellent condition
(Used & mechancial)
starting at: $600

Available 220V/1/60

Includes drill chuck starting at $950

Available 220V/1/60
Geared Head Bench Drill
Capacities:
-Drilling/ Piercing: 1 ¼”
-Type:  geartype box and automatic feeds

or

In excellent condition
(Used & mechanical) starting at: $3,000

Add: $500 to $1,200 for 220V/1/60

Includes drill chuck starting at : $6,000

Add: $500 to $1,200 for 220V/1/60

Gearedhead Bench Drill
Capacities:
-Piercing/ Drilling: 1 ¼” and more

Arms Length: 30” and more

In excellent condition
(Used & mechanical)
starting at : $6,000

Add: $1,000 to $1,800 for 220V/1/60

Includes drill chucks starting at: $10,500

Add: $1,000 to $1,800 for 220V/1/60

 


*P.S.

-The cutting tools are not included.
-We do not necessarily have the equipment listed aabove in stock.
-The transportation is not included in the amounts shown.
-The “New” equipments are guarenteed on parts for 1 year. We allow 30 days to return used equipment. The transportation fees are the buyer’s responsibility.
-The dimensions shown are a result of the requests we have received in the part.


Discounts are given upon purchase of several equipments and tools.

 

To all equipment, you must add a minimum of tools:

 

Tools for Geared heads (starting at $1,000):

 

-Drill chuck
-2-axis digital readout starting at $3,000
- Thread tools int/ext, avec pastilles
- Draining tools, avec pastilles
- Mobile point


Tools for Milling Machines (Drill) starting at $1,000 or $1,600:

- Swivel vise 6''
- Spring collets set
- Set of mounting clamps
- Face mill 3'', with holder
- Set of mills with 2 lips , 3/16'' à 5/8''
- Set of parallels
-2-axis digital readout starting at $2,500
-3-axis digital readout starting at $3,500

 

> Back to Top of Page